Extraction Liquid-Solid

extractor-soxhletSoxhlet extractors

To BS2071 where applicable. Designed primarily for use with proprietary makes of paper thimble and suitable sizes are listed on the next page. Large samples may be placed directly in the extractor body.

Models

Adapter and clip

EX5/105 is designed to accommodate large samples and utilises a 100mm flat flange joint requiring the flat flange/ socket adapter and clip listed below

Models

extractor-plain-bodyPlain body extractors

Quickfit plain body extractors are designed so   that the vapour permeates directly through the material to be extracted,   partially condenses and washes back into the flask, a process accompanied by   the usual solvent reflux. A glass spiral supports the sample either directly   or in a paper thimble

Models

complete-assembliesComplete standard assemblies

Quickfit plain body extractors are designed so   that the vapour permeates directly through the material to be extracted,   partially condenses and washes back into the flask, a process accompanied by   the usual solvent reflux. A glass spiral supports the sample either directly   or in a paper thimble

Models

Pressure equalising funnels

These funnels may be used with Soxhlets to facilitate recovery at the end of an extraction. Fitted between the extractor and the condenser the funnel stopcock is left open until extraction is completed. The stopcock is then closedso as to collect the solvent for future use. Full details see QDE and QDEC series

Paper thimbles

Recommended sizes for use with Quickfit extractor

Models

Latest News

Promotions

Location

Contacts

11 McDougall Street
Kotara, NSW, 2289
Free Call:1800 021 083

e. sales@austscientific.com.au