Balance - Moisture Analyser - Australian Scientific https://www.austscientific.com.au/product-category/balance/a-d-balances/balances-moisture-analyser/ Sat, 16 May 2026 03:36:06 +0000 en-AU hourly 1 https://www.austscientific.com.au/storage/2019/07/Aust-Scientific-150x150.png Balance - Moisture Analyser - Australian Scientific https://www.austscientific.com.au/product-category/balance/a-d-balances/balances-moisture-analyser/ 32 32 Moisture Analyser 51g x 0.005g (ML-53A) https://www.austscientific.com.au/product/moisture-analysers-with-sra-technology-51g-x-0-005g/ Mon, 03 May 2021 04:49:44 +0000 https://www.austscientific.com.au/?post_type=product&p=7961 Reverse Backlit LCD

The post Moisture Analyser 51g x 0.005g (ML-53A) appeared first on Australian Scientific.

]]> Streamline your moisture analysis with A&D’s latest range of high-performance moisture analysers. Designed to deliver exceptional accuracy with minimal complexity, these instruments combine intelligent optimisation, real-time feedback, and flexible programming to produce consistent, high-quality results—regardless of application or operator experience. With intuitive touch or LCD interfaces and advanced heating control, this series sets a new benchmark for reliability and ease of use.

Key Features

  • Industry-leading 5-year warranty

  • Safe, simple, reagent-free heat-drying technology

  • Six models available, from advanced touchscreen analysers (MS-74AT / MX-53AT) to cost-effective reverse backlit LCD models

  • Optimum Temperature Search (RsTemp) for fast identification of recommended drying temperatures

  • High-power 400 W halogen heater for rapid, efficient heating

  • Secondary Radiation Assist (SRA) for uniform heat distribution and heater protection

  • Super Hybrid Sensor (SHS) for outstanding precision and reproducibility

  • Soft-close heater cover for improved comfort and durability

  • Automatic tare and measurement start on cover closure*¹

  • Preheating function for enhanced result consistency

  • Real-time display of moisture content and drying rate (%/min)

  • Offset adjustment up to ±9.999%*² for result alignment

  • Weighing mode allows use as a precision balance

  • Thermal analysis mode with up to five drying stages*¹

  • Programmed measurement with storage for up to 300 user-defined programs
    (200 for reverse backlit LCD models)

  • Over 100 preset programs included

  • Built-in level meter for accurate sample positioning

  • Sample mass calculation tool for optimised moisture measurement*¹

  • Sample pretreatment guide based on material characteristics*¹

  • Automatic drying-time estimation in Timer mode with three accuracy levels*¹

  • Plastic measurement guide for low-moisture samples (≤1%)*¹

  • Comparator function with HI / OK / LO thresholds

  • User Access Control (UAC) with password and permission management

  • Automatic storage of up to 3,000 measurement results
    (200 for reverse backlit LCD models)

  • Full history tracking (adjustments, operation, user log-in/out)

  • Daily-check and self-check functions for stable operation

  • Accuracy verification using sodium tartrate dihydrate test samples

  • Independent adjustment of weight sensor and heater

  • GLP / GMP / GCP / ISO-compliant data output

Model Options

Touchscreen Models: MS-74AT & MX-53AT

Designed for users who demand maximum precision and usability, these models feature a 5-inch colour touchscreen with intuitive navigation, real-time graphical feedback, and advanced on-screen support tools. The pressure-sensitive display allows reliable operation even when wearing thick gloves. Multilingual support includes 11 languages: English, French, German, Italian, Dutch, Spanish, Portuguese, Russian, Korean, Chinese, and Japanese.

Reverse Backlit LCD Models: MS-74A, MX-53A, MF-53A & ML-53A

Ideal for cost-conscious laboratories and production environments, these models deliver dependable performance with a streamlined interface and high-visibility display. Four variants offer different levels of readability and precision, supporting both high-accuracy measurements and applications where moderate accuracy is sufficient.

The post Moisture Analyser 51g x 0.005g (ML-53A) appeared first on Australian Scientific.

]]> Moisture Analyser 51g x 0.002g (MF-53A) https://www.austscientific.com.au/product/moisture-analysers-with-sra-technology-51g-x-0-002g/ Mon, 03 May 2021 04:48:14 +0000 https://www.austscientific.com.au/?post_type=product&p=7959 Reverse Backlit LCD

The post Moisture Analyser 51g x 0.002g (MF-53A) appeared first on Australian Scientific.

]]> Streamline your moisture analysis with A&D’s latest range of high-performance moisture analysers. Designed to deliver exceptional accuracy with minimal complexity, these instruments combine intelligent optimisation, real-time feedback, and flexible programming to produce consistent, high-quality results—regardless of application or operator experience. With intuitive touch or LCD interfaces and advanced heating control, this series sets a new benchmark for reliability and ease of use.

Key Features

  • Industry-leading 5-year warranty

  • Safe, simple, reagent-free heat-drying technology

  • Six models available, from advanced touchscreen analysers (MS-74AT / MX-53AT) to cost-effective reverse backlit LCD models

  • Optimum Temperature Search (RsTemp) for fast identification of recommended drying temperatures

  • High-power 400 W halogen heater for rapid, efficient heating

  • Secondary Radiation Assist (SRA) for uniform heat distribution and heater protection

  • Super Hybrid Sensor (SHS) for outstanding precision and reproducibility

  • Soft-close heater cover for improved comfort and durability

  • Automatic tare and measurement start on cover closure*¹

  • Preheating function for enhanced result consistency

  • Real-time display of moisture content and drying rate (%/min)

  • Offset adjustment up to ±9.999%*² for result alignment

  • Weighing mode allows use as a precision balance

  • Thermal analysis mode with up to five drying stages*¹

  • Programmed measurement with storage for up to 300 user-defined programs
    (200 for reverse backlit LCD models)

  • Over 100 preset programs included

  • Built-in level meter for accurate sample positioning

  • Sample mass calculation tool for optimised moisture measurement*¹

  • Sample pretreatment guide based on material characteristics*¹

  • Automatic drying-time estimation in Timer mode with three accuracy levels*¹

  • Plastic measurement guide for low-moisture samples (≤1%)*¹

  • Comparator function with HI / OK / LO thresholds

  • User Access Control (UAC) with password and permission management

  • Automatic storage of up to 3,000 measurement results
    (200 for reverse backlit LCD models)

  • Full history tracking (adjustments, operation, user log-in/out)

  • Daily-check and self-check functions for stable operation

  • Accuracy verification using sodium tartrate dihydrate test samples

  • Independent adjustment of weight sensor and heater

  • GLP / GMP / GCP / ISO-compliant data output

Model Options

Touchscreen Models: MS-74AT & MX-53AT

Designed for users who demand maximum precision and usability, these models feature a 5-inch colour touchscreen with intuitive navigation, real-time graphical feedback, and advanced on-screen support tools. The pressure-sensitive display allows reliable operation even when wearing thick gloves. Multilingual support includes 11 languages: English, French, German, Italian, Dutch, Spanish, Portuguese, Russian, Korean, Chinese, and Japanese.

Reverse Backlit LCD Models: MS-74A, MX-53A, MF-53A & ML-53A

Ideal for cost-conscious laboratories and production environments, these models deliver dependable performance with a streamlined interface and high-visibility display. Four variants offer different levels of readability and precision, supporting both high-accuracy measurements and applications where moderate accuracy is sufficient.

The post Moisture Analyser 51g x 0.002g (MF-53A) appeared first on Australian Scientific.

]]> Moisture Analyse 51g x 0.001g (MX-53A) https://www.austscientific.com.au/product/moisture-analysers-with-sra-technology-51g-x-0-001g/ Mon, 03 May 2021 04:46:08 +0000 https://www.austscientific.com.au/?post_type=product&p=7956 Reverse Backlit LCD

 

The post Moisture Analyse 51g x 0.001g (MX-53A) appeared first on Australian Scientific.

]]> Streamline your moisture analysis with A&D’s latest range of high-performance moisture analysers. Designed to deliver exceptional accuracy with minimal complexity, these instruments combine intelligent optimisation, real-time feedback, and flexible programming to produce consistent, high-quality results—regardless of application or operator experience. With intuitive touch or LCD interfaces and advanced heating control, this series sets a new benchmark for reliability and ease of use.

Key Features

  • Industry-leading 5-year warranty

  • Safe, simple, reagent-free heat-drying technology

  • Six models available, from advanced touchscreen analysers (MS-74AT / MX-53AT) to cost-effective reverse backlit LCD models

  • Optimum Temperature Search (RsTemp) for fast identification of recommended drying temperatures

  • High-power 400 W halogen heater for rapid, efficient heating

  • Secondary Radiation Assist (SRA) for uniform heat distribution and heater protection

  • Super Hybrid Sensor (SHS) for outstanding precision and reproducibility

  • Soft-close heater cover for improved comfort and durability

  • Automatic tare and measurement start on cover closure*¹

  • Preheating function for enhanced result consistency

  • Real-time display of moisture content and drying rate (%/min)

  • Offset adjustment up to ±9.999%*² for result alignment

  • Weighing mode allows use as a precision balance

  • Thermal analysis mode with up to five drying stages*¹

  • Programmed measurement with storage for up to 300 user-defined programs
    (200 for reverse backlit LCD models)

  • Over 100 preset programs included

  • Built-in level meter for accurate sample positioning

  • Sample mass calculation tool for optimised moisture measurement*¹

  • Sample pretreatment guide based on material characteristics*¹

  • Automatic drying-time estimation in Timer mode with three accuracy levels*¹

  • Plastic measurement guide for low-moisture samples (≤1%)*¹

  • Comparator function with HI / OK / LO thresholds

  • User Access Control (UAC) with password and permission management

  • Automatic storage of up to 3,000 measurement results
    (200 for reverse backlit LCD models)

  • Full history tracking (adjustments, operation, user log-in/out)

  • Daily-check and self-check functions for stable operation

  • Accuracy verification using sodium tartrate dihydrate test samples

  • Independent adjustment of weight sensor and heater

  • GLP / GMP / GCP / ISO-compliant data output

Model Options

Touchscreen Models: MS-74AT & MX-53AT

Designed for users who demand maximum precision and usability, these models feature a 5-inch colour touchscreen with intuitive navigation, real-time graphical feedback, and advanced on-screen support tools. The pressure-sensitive display allows reliable operation even when wearing thick gloves. Multilingual support includes 11 languages: English, French, German, Italian, Dutch, Spanish, Portuguese, Russian, Korean, Chinese, and Japanese.

Reverse Backlit LCD Models: MS-74A, MX-53A, MF-53A & ML-53A

Ideal for cost-conscious laboratories and production environments, these models deliver dependable performance with a streamlined interface and high-visibility display. Four variants offer different levels of readability and precision, supporting both high-accuracy measurements and applications where moderate accuracy is sufficient.

The post Moisture Analyse 51g x 0.001g (MX-53A) appeared first on Australian Scientific.

]]> Moisture Analyse 71g x 0.0001g (MS-74A) https://www.austscientific.com.au/product/moisture-analysers-with-sra-technology-71g-x-0-0001g/ Mon, 03 May 2021 04:41:52 +0000 https://www.austscientific.com.au/?post_type=product&p=7952 Reverse Backlit LCD

The post Moisture Analyse 71g x 0.0001g (MS-74A) appeared first on Australian Scientific.

]]> Streamline your moisture analysis with A&D’s latest range of high-performance moisture analysers. Designed to deliver exceptional accuracy with minimal complexity, these instruments combine intelligent optimisation, real-time feedback, and flexible programming to produce consistent, high-quality results—regardless of application or operator experience. With intuitive touch or LCD interfaces and advanced heating control, this series sets a new benchmark for reliability and ease of use.

Key Features

  • Industry-leading 5-year warranty

  • Safe, simple, reagent-free heat-drying technology

  • Six models available, from advanced touchscreen analysers (MS-74AT / MX-53AT) to cost-effective reverse backlit LCD models

  • Optimum Temperature Search (RsTemp) for fast identification of recommended drying temperatures

  • High-power 400 W halogen heater for rapid, efficient heating

  • Secondary Radiation Assist (SRA) for uniform heat distribution and heater protection

  • Super Hybrid Sensor (SHS) for outstanding precision and reproducibility

  • Soft-close heater cover for improved comfort and durability

  • Automatic tare and measurement start on cover closure*¹

  • Preheating function for enhanced result consistency

  • Real-time display of moisture content and drying rate (%/min)

  • Offset adjustment up to ±9.999%*² for result alignment

  • Weighing mode allows use as a precision balance

  • Thermal analysis mode with up to five drying stages*¹

  • Programmed measurement with storage for up to 300 user-defined programs
    (200 for reverse backlit LCD models)

  • Over 100 preset programs included

  • Built-in level meter for accurate sample positioning

  • Sample mass calculation tool for optimised moisture measurement*¹

  • Sample pretreatment guide based on material characteristics*¹

  • Automatic drying-time estimation in Timer mode with three accuracy levels*¹

  • Plastic measurement guide for low-moisture samples (≤1%)*¹

  • Comparator function with HI / OK / LO thresholds

  • User Access Control (UAC) with password and permission management

  • Automatic storage of up to 3,000 measurement results
    (200 for reverse backlit LCD models)

  • Full history tracking (adjustments, operation, user log-in/out)

  • Daily-check and self-check functions for stable operation

  • Accuracy verification using sodium tartrate dihydrate test samples

  • Independent adjustment of weight sensor and heater

  • GLP / GMP / GCP / ISO-compliant data output

Model Options

Touchscreen Models: MS-74AT & MX-53AT

Designed for users who demand maximum precision and usability, these models feature a 5-inch colour touchscreen with intuitive navigation, real-time graphical feedback, and advanced on-screen support tools. The pressure-sensitive display allows reliable operation even when wearing thick gloves. Multilingual support includes 11 languages: English, French, German, Italian, Dutch, Spanish, Portuguese, Russian, Korean, Chinese, and Japanese.

Reverse Backlit LCD Models: MS-74A, MX-53A, MF-53A & ML-53A

Ideal for cost-conscious laboratories and production environments, these models deliver dependable performance with a streamlined interface and high-visibility display. Four variants offer different levels of readability and precision, supporting both high-accuracy measurements and applications where moderate accuracy is sufficient.

The post Moisture Analyse 71g x 0.0001g (MS-74A) appeared first on Australian Scientific.

]]> Moisture Analyse 51g x 0.001g (MX-53AT) https://www.austscientific.com.au/product/moisture-analyse-51g-x-0-001g-mx-53at/ Mon, 02 Feb 2026 00:22:16 +0000 https://www.austscientific.com.au/?post_type=product&p=27641 LCD Touch Screen

 

The post Moisture Analyse 51g x 0.001g (MX-53AT) appeared first on Australian Scientific.

]]> Streamline your moisture analysis with A&D’s latest range of high-performance moisture analysers. Designed to deliver exceptional accuracy with minimal complexity, these instruments combine intelligent optimisation, real-time feedback, and flexible programming to produce consistent, high-quality results—regardless of application or operator experience. With intuitive touch or LCD interfaces and advanced heating control, this series sets a new benchmark for reliability and ease of use.

Key Features

  • Industry-leading 5-year warranty

  • Safe, simple, reagent-free heat-drying technology

  • Six models available, from advanced touchscreen analysers (MS-74AT / MX-53AT) to cost-effective reverse backlit LCD models

  • Optimum Temperature Search (RsTemp) for fast identification of recommended drying temperatures

  • High-power 400 W halogen heater for rapid, efficient heating

  • Secondary Radiation Assist (SRA) for uniform heat distribution and heater protection

  • Super Hybrid Sensor (SHS) for outstanding precision and reproducibility

  • Soft-close heater cover for improved comfort and durability

  • Automatic tare and measurement start on cover closure*¹

  • Preheating function for enhanced result consistency

  • Real-time display of moisture content and drying rate (%/min)

  • Offset adjustment up to ±9.999%*² for result alignment

  • Weighing mode allows use as a precision balance

  • Thermal analysis mode with up to five drying stages*¹

  • Programmed measurement with storage for up to 300 user-defined programs
    (200 for reverse backlit LCD models)

  • Over 100 preset programs included

  • Built-in level meter for accurate sample positioning

  • Sample mass calculation tool for optimised moisture measurement*¹

  • Sample pretreatment guide based on material characteristics*¹

  • Automatic drying-time estimation in Timer mode with three accuracy levels*¹

  • Plastic measurement guide for low-moisture samples (≤1%)*¹

  • Comparator function with HI / OK / LO thresholds

  • User Access Control (UAC) with password and permission management

  • Automatic storage of up to 3,000 measurement results
    (200 for reverse backlit LCD models)

  • Full history tracking (adjustments, operation, user log-in/out)

  • Daily-check and self-check functions for stable operation

  • Accuracy verification using sodium tartrate dihydrate test samples

  • Independent adjustment of weight sensor and heater

  • GLP / GMP / GCP / ISO-compliant data output

Model Options

Touchscreen Models: MS-74AT & MX-53AT

Designed for users who demand maximum precision and usability, these models feature a 5-inch colour touchscreen with intuitive navigation, real-time graphical feedback, and advanced on-screen support tools. The pressure-sensitive display allows reliable operation even when wearing thick gloves. Multilingual support includes 11 languages: English, French, German, Italian, Dutch, Spanish, Portuguese, Russian, Korean, Chinese, and Japanese.

Reverse Backlit LCD Models: MS-74A, MX-53A, MF-53A & ML-53A

Ideal for cost-conscious laboratories and production environments, these models deliver dependable performance with a streamlined interface and high-visibility display. Four variants offer different levels of readability and precision, supporting both high-accuracy measurements and applications where moderate accuracy is sufficient.

The post Moisture Analyse 51g x 0.001g (MX-53AT) appeared first on Australian Scientific.

]]> Moisture Analyse 71g x 0.0001g (MS-74AT) https://www.austscientific.com.au/product/moisture-analyse-71g-x-0-0001g-ms-74at/ Mon, 02 Feb 2026 00:19:00 +0000 https://www.austscientific.com.au/?post_type=product&p=27639 LCD Touch Screen

The post Moisture Analyse 71g x 0.0001g (MS-74AT) appeared first on Australian Scientific.

]]> Streamline your moisture analysis with A&D’s latest range of high-performance moisture analysers. Designed to deliver exceptional accuracy with minimal complexity, these instruments combine intelligent optimisation, real-time feedback, and flexible programming to produce consistent, high-quality results—regardless of application or operator experience. With intuitive touch or LCD interfaces and advanced heating control, this series sets a new benchmark for reliability and ease of use.

Key Features

  • Industry-leading 5-year warranty

  • Safe, simple, reagent-free heat-drying technology

  • Six models available, from advanced touchscreen analysers (MS-74AT / MX-53AT) to cost-effective reverse backlit LCD models

  • Optimum Temperature Search (RsTemp) for fast identification of recommended drying temperatures

  • High-power 400 W halogen heater for rapid, efficient heating

  • Secondary Radiation Assist (SRA) for uniform heat distribution and heater protection

  • Super Hybrid Sensor (SHS) for outstanding precision and reproducibility

  • Soft-close heater cover for improved comfort and durability

  • Automatic tare and measurement start on cover closure*¹

  • Preheating function for enhanced result consistency

  • Real-time display of moisture content and drying rate (%/min)

  • Offset adjustment up to ±9.999%*² for result alignment

  • Weighing mode allows use as a precision balance

  • Thermal analysis mode with up to five drying stages*¹

  • Programmed measurement with storage for up to 300 user-defined programs
    (200 for reverse backlit LCD models)

  • Over 100 preset programs included

  • Built-in level meter for accurate sample positioning

  • Sample mass calculation tool for optimised moisture measurement*¹

  • Sample pretreatment guide based on material characteristics*¹

  • Automatic drying-time estimation in Timer mode with three accuracy levels*¹

  • Plastic measurement guide for low-moisture samples (≤1%)*¹

  • Comparator function with HI / OK / LO thresholds

  • User Access Control (UAC) with password and permission management

  • Automatic storage of up to 3,000 measurement results
    (200 for reverse backlit LCD models)

  • Full history tracking (adjustments, operation, user log-in/out)

  • Daily-check and self-check functions for stable operation

  • Accuracy verification using sodium tartrate dihydrate test samples

  • Independent adjustment of weight sensor and heater

  • GLP / GMP / GCP / ISO-compliant data output

Model Options

Touchscreen Models: MS-74AT & MX-53AT

Designed for users who demand maximum precision and usability, these models feature a 5-inch colour touchscreen with intuitive navigation, real-time graphical feedback, and advanced on-screen support tools. The pressure-sensitive display allows reliable operation even when wearing thick gloves. Multilingual support includes 11 languages: English, French, German, Italian, Dutch, Spanish, Portuguese, Russian, Korean, Chinese, and Japanese.

Reverse Backlit LCD Models: MS-74A, MX-53A, MF-53A & ML-53A

Ideal for cost-conscious laboratories and production environments, these models deliver dependable performance with a streamlined interface and high-visibility display. Four variants offer different levels of readability and precision, supporting both high-accuracy measurements and applications where moderate accuracy is sufficient.

The post Moisture Analyse 71g x 0.0001g (MS-74AT) appeared first on Australian Scientific.

]]>