• 580 Watts cooling capacity
• Corrosion resistant stainless steel immersion coil
• Mounting clamp fixes the coil to any tank
• Below-ambient and sub-zero control with THx000
• Main unit can be stored under bench while in use

The post Immersion Cooler 580 Watts Cooling – Model No – RC1 appeared first on Australian Scientific.

• Open water tank can be used with thermoregulator
• Cools to -10°C (with suitable additives)
• 7 Litre per minute pump with external recirculation ports
• Below-ambient and sub-zero control with optional TH8x00 immersion heater circulator
• Stainless steel lid included as standard

The RC4 Refrigerated waterbath when used with an optional immersion heater circulator will provide accurate temperature controlled water at or below ambient temperatures. The waterbath has a capacity of approximately 12 litres. A built in heavy duty recirculating pump provides closed loop circulation at the rate of 7 litres per minute, and can offer a reliable and preferable alternative to the use of mains water for cooling Heat exchangers, Electrophoresis baths, Condensers, etc. To avoid accidental damage to the heat exchanger components the RC4 cooling is set to turn of at 4°c, however it can be factory set to have a minimum temperature of -10°C if required. Suitable additives would need to be added to the water for the -10°C version to avoid damage to the system.
Polished grade 304 stainless steel is used for the tank, and surround, and the main case is constructed from a heavy duty plastic.
Heat exchanger components are manufactured from copper.
Only environmentally friendly R134a refrigerant is used in Ratek coolers.

The post Recirculating Cooler – 580 Watts cooling Model No RC4 appeared first on Australian Scientific.