• Polypropylene outer case
• Replaceable flexible heater cartridge
• Maximum element temperature 450°C
• Safety earth (ground) screen for operator safety
• Integral energy regulator control
• Flexible heater cartridge. The heating elements are suspended in a thermal insulating former making for quick and simple replacement
• Safety screen. This earth (ground) screen is preformed in stainless steel and fitted above the heating element. It is earthed (grounded) directly to the supply cable
• Standard fitments. Incorporates the flexible heater cartridge plus a ‘power’ on indicator lamp, earth screen and internal fuse. With one support clamp. Accepts up to 12.7mm diameter rods

*Other Electrothermal mantles and products are available on request

The post Electrothermal Heating Mantle – Model: HM-200-100 appeared first on Australian Scientific.

• Polypropylene outer case
• Replaceable flexible heater cartridge
• Maximum element temperature 450°C
• Safety earth (ground) screen for operator safety
• Integral energy regulator control
• Flexible heater cartridge. The heating elements are suspended in a thermal insulating former making for quick and simple replacement
• Safety screen. This earth (ground) screen is preformed in stainless steel and fitted above the heating element. It is earthed (grounded) directly to the supply cable
• Standard fitments. Incorporates the flexible heater cartridge plus a ‘power’ on indicator lamp, earth screen and internal fuse. With one support clamp. Accepts up to 12.7mm diameter rods

*Other Electrothermal mantles and products are available on request

The post Electrothermal Heating Mantle – Model: HM-200-250 appeared first on Australian Scientific.

• Polypropylene outer case
• Replaceable flexible heater cartridge
• Maximum element temperature 450°C
• Safety earth (ground) screen for operator safety
• Integral energy regulator control
• Flexible heater cartridge. The heating elements are suspended in a thermal insulating former making for quick and simple replacement
• Safety screen. This earth (ground) screen is preformed in stainless steel and fitted above the heating element. It is earthed (grounded) directly to the supply cable
• Standard fitments. Incorporates the flexible heater cartridge plus a ‘power’ on indicator lamp, earth screen and internal fuse. With one support clamp. Accepts up to 12.7mm diameter rods

*Other Electrothermal mantles and products are available on request

The post Electrothermal Heating Mantle – Model: HM-200-500 appeared first on Australian Scientific.

• Polypropylene outer case
• Replaceable flexible heater cartridge
• Maximum element temperature 450°C
• Safety earth (ground) screen for operator safety
• Integral energy regulator control
• Flexible heater cartridge. The heating elements are suspended in a thermal insulating former making for quick and simple replacement
• Safety screen. This earth (ground) screen is preformed in stainless steel and fitted above the heating element. It is earthed (grounded) directly to the supply cable
• Standard fitments. Incorporates the flexible heater cartridge plus a ‘power’ on indicator lamp, earth screen and internal fuse. With one support clamp. Accepts up to 12.7mm diameter rods

*Other Electrothermal mantles and products are available on request

The post Electrothermal Heating Mantle – Model: HM-200-1000 appeared first on Australian Scientific.

• Polypropylene outer case
• Replaceable flexible heater cartridge
• Maximum element temperature 450°C
• Safety earth (ground) screen for operator safety
• Integral energy regulator control
• Flexible heater cartridge. The heating elements are suspended in a thermal insulating former making for quick and simple replacement
• Safety screen. This earth (ground) screen is preformed in stainless steel and fitted above the heating element. It is earthed (grounded) directly to the supply cable
• Standard fitments. Incorporates the flexible heater cartridge plus a ‘power’ on indicator lamp, earth screen and internal fuse. With one support clamp. Accepts up to 12.7mm diameter rods

*Other Electrothermal mantles and products are available on request

The post Electrothermal Heating Mantle – Model: HM-200-2000 appeared first on Australian Scientific.

• Polypropylene outer case
• Replaceable flexible heater cartridge
• Maximum element temperature 450°C
• Safety earth (ground) screen for operator safety
• Integral energy regulator control
• Flexible heater cartridge. The heating elements are suspended in a thermal insulating former making for quick and simple replacement
• Safety screen. This earth (ground) screen is preformed in stainless steel and fitted above the heating element. It is earthed (grounded) directly to the supply cable
• Standard fitments. Incorporates the flexible heater cartridge plus a ‘power’ on indicator lamp, earth screen and internal fuse. With one support clamp. Accepts up to 12.7mm diameter rods

*Other Electrothermal mantles and products are available on request

The post Electrothermal Heating Mantle – Model: HM-200-3000 appeared first on Australian Scientific.

• Polypropylene outer case
• Replaceable flexible heater cartridge
• Maximum element temperature 450°C
• Safety earth (ground) screen for operator safety
• Integral energy regulator control
• Flexible heater cartridge. The heating elements are suspended in a thermal insulating former making for quick and simple replacement
• Safety screen. This earth (ground) screen is preformed in stainless steel and fitted above the heating element. It is earthed (grounded) directly to the supply cable
• Standard fitments. Incorporates the flexible heater cartridge plus a ‘power’ on indicator lamp, earth screen and internal fuse. With one support clamp. Accepts up to 12.7mm diameter rods

*Other Electrothermal mantles and products are available on request

The post Electrothermal Heating Mantle – Model: HM-200-5000 appeared first on Australian Scientific.

• Polypropylene outer case
• Replaceable flexible heater cartridge
• Maximum element temperature 450°C
• Heating element is protected by a stainless steel liner preformed to accommodate a wide range of flasks and funnels
• Liner is earthed (grounded) for added protection
• Integral energy regulator control
• Time proportional arbitrarily scaled controller
• Flexible heater cartridge. The heating elements are suspended in a thermal insulating former making for quick and simple replacement
• Safety screen. This earth (ground) screen is preformed in stainless steel and fitted above the heating element. It is earthed (grounded) directly to the supply cable
• Standard fitments. Incorporates the flexible heater cartridge plus a ‘power’ on indicator lamp, earth screen and internal fuse. With one support clamp. Accepts up to 12.7mm diameter rods

*Other Electrothermal mantles and products are available on request

The post Electrothermal Heating Mantle Spillproof – Model: HM-200-SP-1000 appeared first on Australian Scientific.

• Polypropylene outer case
• Replaceable flexible heater cartridge
• Maximum element temperature 450°C
• Heating element is protected by a stainless steel liner preformed to accommodate a wide range of flasks and funnels
• Liner is earthed (grounded) for added protection
• Integral energy regulator control
• Time proportional arbitrarily scaled controller
• Flexible heater cartridge. The heating elements are suspended in a thermal insulating former making for quick and simple replacement
• Safety screen. This earth (ground) screen is preformed in stainless steel and fitted above the heating element. It is earthed (grounded) directly to the supply cable
• Standard fitments. Incorporates the flexible heater cartridge plus a ‘power’ on indicator lamp, earth screen and internal fuse. With one support clamp. Accepts up to 12.7mm diameter rods

*Other Electrothermal mantles and products are available on request

The post Electrothermal Heating Mantle Spillproof – Model: HM-200-SP-5000 appeared first on Australian Scientific.

• Polypropylene outer case
• Replaceable flexible heater cartridge
• Maximum element temperature 450°C
• Heating element is protected by a stainless steel liner preformed to accommodate a wide range of flasks and funnels
• Liner is earthed (grounded) for added protection
• Integral energy regulator control
• Time proportional arbitrarily scaled controller
• Stepless speed control up to approximately 520rpm with auto-reverse facility
• Flexible heater cartridge. The heating elements are suspended in a thermal insulating former making for quick and simple replacement
• Safety screen. This earth (ground) screen is preformed in stainless steel and fitted above the heating element. It is earthed (grounded) directly to the supply cable
• Standard fitments. Incorporates the flexible heater cartridge plus a ‘power’ on indicator lamp, earth screen and internal fuse. With one support clamp. Accepts up to 12.7mm diameter rods

*Other Electrothermal mantles and products are available on request

The post Electrothermal Heating Mantle Stirrer – Model: SHM-200-50 appeared first on Australian Scientific.

• Polypropylene outer case
• Replaceable flexible heater cartridge
• Maximum element temperature 450°C
• Heating element is protected by a stainless steel liner preformed to accommodate a wide range of flasks and funnels
• Liner is earthed (grounded) for added protection
• Integral energy regulator control
• Time proportional arbitrarily scaled controller
• Stepless speed control up to approximately 520rpm with auto-reverse facility
• Flexible heater cartridge. The heating elements are suspended in a thermal insulating former making for quick and simple replacement
• Safety screen. This earth (ground) screen is preformed in stainless steel and fitted above the heating element. It is earthed (grounded) directly to the supply cable
• Standard fitments. Incorporates the flexible heater cartridge plus a ‘power’ on indicator lamp, earth screen and internal fuse. With one support clamp. Accepts up to 12.7mm diameter rods

*Other Electrothermal mantles and products are available on request

The post Electrothermal Heating Mantle Stirrer – Model: SHM-200-100 appeared first on Australian Scientific.

• Polypropylene outer case
• Replaceable flexible heater cartridge
• Maximum element temperature 450°C
• Heating element is protected by a stainless steel liner preformed to accommodate a wide range of flasks and funnels
• Liner is earthed (grounded) for added protection
• Integral energy regulator control
• Time proportional arbitrarily scaled controller
• Stepless speed control up to approximately 520rpm with auto-reverse facility
• Flexible heater cartridge. The heating elements are suspended in a thermal insulating former making for quick and simple replacement
• Safety screen. This earth (ground) screen is preformed in stainless steel and fitted above the heating element. It is earthed (grounded) directly to the supply cable
• Standard fitments. Incorporates the flexible heater cartridge plus a ‘power’ on indicator lamp, earth screen and internal fuse. With one support clamp. Accepts up to 12.7mm diameter rods

*Other Electrothermal mantles and products are available on request

The post Electrothermal Heating Mantle Stirrer – Model: SHM-200-250 appeared first on Australian Scientific.

• Polypropylene outer case
• Replaceable flexible heater cartridge
• Maximum element temperature 450°C
• Heating element is protected by a stainless steel liner preformed to accommodate a wide range of flasks and funnels
• Liner is earthed (grounded) for added protection
• Integral energy regulator control
• Time proportional arbitrarily scaled controller
• Stepless speed control up to approximately 520rpm with auto-reverse facility
• Flexible heater cartridge. The heating elements are suspended in a thermal insulating former making for quick and simple replacement
• Safety screen. This earth (ground) screen is preformed in stainless steel and fitted above the heating element. It is earthed (grounded) directly to the supply cable
• Standard fitments. Incorporates the flexible heater cartridge plus a ‘power’ on indicator lamp, earth screen and internal fuse. With one support clamp. Accepts up to 12.7mm diameter rods

*Other Electrothermal mantles and products are available on request

The post Electrothermal Heating Mantle Stirrer – Model: SHM-200-500 appeared first on Australian Scientific.

• Polypropylene outer case
• Replaceable flexible heater cartridge
• Maximum element temperature 450°C
• Heating element is protected by a stainless steel liner preformed to accommodate a wide range of flasks and funnels
• Liner is earthed (grounded) for added protection
• Integral energy regulator control
• Time proportional arbitrarily scaled controller
• Stepless speed control up to approximately 520rpm with auto-reverse facility
• Flexible heater cartridge. The heating elements are suspended in a thermal insulating former making for quick and simple replacement
• Safety screen. This earth (ground) screen is preformed in stainless steel and fitted above the heating element. It is earthed (grounded) directly to the supply cable
• Standard fitments. Incorporates the flexible heater cartridge plus a ‘power’ on indicator lamp, earth screen and internal fuse. With one support clamp. Accepts up to 12.7mm diameter rods

*Other Electrothermal mantles and products are available on request

The post Electrothermal Heating Mantle Stirrer – Model: SHM-200-1000 appeared first on Australian Scientific.

• Polypropylene outer case
• Replaceable flexible heater cartridge
• Maximum element temperature 450°C
• Heating element is protected by a stainless steel liner preformed to accommodate a wide range of flasks and funnels
• Liner is earthed (grounded) for added protection
• Integral energy regulator control
• Time proportional arbitrarily scaled controller
• Stepless speed control up to approximately 520rpm with auto-reverse facility
• Flexible heater cartridge. The heating elements are suspended in a thermal insulating former making for quick and simple replacement
• Safety screen. This earth (ground) screen is preformed in stainless steel and fitted above the heating element. It is earthed (grounded) directly to the supply cable
• Standard fitments. Incorporates the flexible heater cartridge plus a ‘power’ on indicator lamp, earth screen and internal fuse. With one support clamp. Accepts up to 12.7mm diameter rods

*Other Electrothermal mantles and products are available on request

The post Electrothermal Heating Mantle Stirrer – Model: SHM-200-2000 appeared first on Australian Scientific.

• Polypropylene outer case
• Replaceable flexible heater cartridge
• Maximum element temperature 450°C
• Safety earth (ground) screen for operator safety
• Integral energy regulator control
• Flexible heater cartridge. The heating elements are suspended in a thermal insulating former making for quick and simple replacement
• Safety screen. This earth (ground) screen is preformed in stainless steel and fitted above the heating element. It is earthed (grounded) directly to the supply cable
• Standard fitments. Incorporates the flexible heater cartridge plus a ‘power’ on indicator lamp, earth screen and internal fuse. With one support clamp. Accepts up to 12.7mm diameter rods

*Other Electrothermal mantles and products are available on request

The post Electrothermal Heating MultiMantle – Model: HM-200-V-50 appeared first on Australian Scientific.

• Polypropylene outer case
• Replaceable flexible heater cartridge
• Maximum element temperature 450°C
• Safety earth (ground) screen for operator safety
• Integral energy regulator control
• Flexible heater cartridge. The heating elements are suspended in a thermal insulating former making for quick and simple replacement
• Safety screen. This earth (ground) screen is preformed in stainless steel and fitted above the heating element. It is earthed (grounded) directly to the supply cable
• Standard fitments. Incorporates the flexible heater cartridge plus a ‘power’ on indicator lamp, earth screen and internal fuse. With one support clamp. Accepts up to 12.7mm diameter rods

*Other Electrothermal mantles and products are available on request

The post Electrothermal Heating MultiMantle – Model: HM-200-V-1000 appeared first on Australian Scientific.

• Polypropylene outer case
• Replaceable flexible heater cartridge
• Maximum element temperature 450°C
• Safety earth (ground) screen for operator safety
• Integral energy regulator control
• Flexible heater cartridge. The heating elements are suspended in a thermal insulating former making for quick and simple replacement
• Safety screen. This earth (ground) screen is preformed in stainless steel and fitted above the heating element. It is earthed (grounded) directly to the supply cable
• Standard fitments. Incorporates the flexible heater cartridge plus a ‘power’ on indicator lamp, earth screen and internal fuse. With one support clamp. Accepts up to 12.7mm diameter rods

*Other Electrothermal mantles and products are available on request

The post Electrothermal Heating MultiMantle – Model: HM-200-V-5000 appeared first on Australian Scientific.