The only pocket meter that directly measures conductivity in 0.12ml sample and converts it into salinity or salt concentration. No need for a beaker to calibrate the meter or measure a sample. Just place few drops of the standard or sample onto the sensor. This procedure saves you time and prevents wasting your precious sample.

• Minimum sample volume: 0.12ml
• Salinity and temperature display
• Up to 2 calibration points
• Auto calibration
• Auto standard recognition: 0.50 & 5.00 % NaCl
• Auto temperature compensation: 2%/ºC fixed
• Temperature calibration: 5 to 40.0 ºC
• 2 Salinity curves: NaCl & Seawater
• Auto stable / auto hold measurement
• Auto power off: 30 mins.
• Low battery indicator
• IP67 Rating dust & waterproof
• Replaceable sensor
• 400 Hours battery life: continuous use without backlight
• Material: ABS epoxy body & titanium coated with platinum black sensor
• Display: custom (monochrome) digital LCD with backlight
• Operating conditions: 5 to 40°C, 85% or less relative humidity
• Warranty: 2 years – meter, 6 months – sensor
• Packed in handy carrying case
• Supplied with 0.5% & 5.0% NaCl standards (14ml each), conditioning solution (4ml), 2 x CR2032 batteries, dropper, instruction and quick manuals

The post Salt Meter Pocket Type – LAQUAtwin ION Salt-11 appeared first on Australian Scientific.

Also known as:
pH conductivity meter, benchtop pH conductivity, bench pH conductivity meter, lab pH conductivity meter, laboratory pH conductivity meter, HORIBA pH conductivity meter, Laqua pH conductivity meter, pH conductivity ORP meter, benchtop pH conductivity ORP meter, HORIBA pH conductivity ORP meter, pH ion meter, pH ISE meter

The post pH Meter Kit with Conductivity, ORP, ION, TDS, Salinity and Temp – LAQUA F-74A-S appeared first on Australian Scientific.

Also known as:
pH meter, benchtop pH meter, bench pH meter, lab pH meter, laboratory pH meter, HORIBA pH meter, Laqua pH meter, pH ORP meter, benchtop pH ORP meter, HORIBA pH ORP meter, pH ion meter, pH ISE meter

The post pH Meter Kit with ORP, ION and Temp – LAQUA F-72A-S appeared first on Australian Scientific.

Also known as:
pH meter, benchtop pH meter, bench pH meter, lab pH meter, laboratory pH meter, HORIBA pH meter, Laqua pH meter, pH ORP meter, benchtop pH ORP meter, HORIBA pH ORP meter, pH ion meter, pH ISE meter

The post pH Meter Kit with ORP, ION and Temp – LAQUA F-73A-S appeared first on Australian Scientific.

• -2.000 to 20.000 pH range
• 0.1, 0.01, & 0.001 pH resolutions
• USA, NIST, NIST2, DIN, and Custom pH buffer groups
• Up to 6 pH calibration points
• Offset, segment and average slopes data after pH calibration
• Adjustable calibration alarm up to 90 days
• -2000.0 to +2000.0 mV range with ORP calibration option
• 0.000 μg/L to 9999 g/L ion range with 3 selectable units
• Up to 5 user-defined ion calibration points
• Segment and average slopes data after ion calibration
• -30.0 to 130.0°C / -22.0 to 266.0°F temperature range with calibration option
• Auto stable, auto hold, and real time measurement modes
• Electrode status, temperature, and reading stability indicators viewable at a glance
• Large memory accepting up to 2000 data sets with date/time stamp
• Auto data log function with adjustable time interval
• Real time clock facilitating time-dependent functions
• Adjustable auto shut-off time up to 30 mins.
• Password protected set-up mode for security
• Software upgrade capability
• PC communication via USB cable and complimentary data acquisition software
• Printer communication via RS232 cable
• 5” Digital, custom LCD display with backlight
• Sleek design with easy-to-use interface and audible key sound feedback
• Small meter footprint with adjustable, integrated electrode stand
• 3 Years warranty

• Height-adjust stopper controls vertical slide of electrode stand arm

Also known as:

ION meter, benchtop ION meter, bench ION meter, lab ION meter, laboratory ION meter, HORIBA pH meter, Laqua ION meter, pH ION meter, benchtop pH ION meter, HORIBA pH ION meter

The post pH Meter Kit with Ammonia Testing – LAQUA NH3 2000-S appeared first on Australian Scientific.

• -2.000 to 20.000 pH range
• 0.1, 0.01, & 0.001 pH resolutions
• USA, NIST, NIST2, DIN, and Custom pH buffer groups
• Up to 6 pH calibration points
• Offset, segment and average slopes data after pH calibration
• Adjustable calibration alarm up to 90 days
• -2000.0 to +2000.0 mV range with ORP calibration option
• 0.000 μg/L to 9999 g/L ion range with 3 selectable units
• Up to 5 user-defined ion calibration points
• Segment and average slopes data after ion calibration
• -30.0 to 130.0°C / -22.0 to 266.0°F temperature range with calibration option
• Auto stable, auto hold, and real time measurement modes
• Electrode status, temperature, and reading stability indicators viewable at a glance
• Large memory accepting up to 2000 data sets with date/time stamp
• Auto data log function with adjustable time interval
• Real time clock facilitating time-dependent functions
• Adjustable auto shut-off time up to 30 mins.
• Password protected set-up mode for security
• Software upgrade capability
• PC communication via USB cable and complimentary data acquisition software
• Printer communication via RS232 cable
• 5” Digital, custom LCD display with backlight
• Sleek design with easy-to-use interface and audible key sound feedback
• Small meter footprint with adjustable, integrated electrode stand
• 3 Years warranty

• Height-adjust stopper controls vertical slide of electrode stand arm

Also known as:

ION meter, benchtop ION meter, bench ION meter, lab ION meter, laboratory ION meter, HORIBA pH meter, Laqua ION meter, pH ION meter, benchtop pH ION meter, HORIBA pH ION meter

The post pH Meter Kit with Calcium Testing- LAQUA CA 2000-S appeared first on Australian Scientific.

• -2.000 to 20.000 pH range
• 0.1, 0.01, & 0.001 pH resolutions
• USA, NIST, NIST2, DIN, and Custom pH buffer groups
• Up to 6 pH calibration points
• Offset, segment and average slopes data after pH calibration
• Adjustable calibration alarm up to 90 days
• -2000.0 to +2000.0 mV range with ORP calibration option
• 0.000 μg/L to 9999 g/L ion range with 3 selectable units
• Up to 5 user-defined ion calibration points
• Segment and average slopes data after ion calibration
• -30.0 to 130.0°C / -22.0 to 266.0°F temperature range with calibration option
• Auto stable, auto hold, and real time measurement modes
• Electrode status, temperature, and reading stability indicators viewable at a glance
• Large memory accepting up to 2000 data sets with date/time stamp
• Auto data log function with adjustable time interval
• Real time clock facilitating time-dependent functions
• Adjustable auto shut-off time up to 30 mins.
• Password protected set-up mode for security
• Software upgrade capability
• PC communication via USB cable and complimentary data acquisition software
• Printer communication via RS232 cable
• 5” Digital, custom LCD display with backlight
• Sleek design with easy-to-use interface and audible key sound feedback
• Small meter footprint with adjustable, integrated electrode stand
• 3 Years warranty

• Height-adjust stopper controls vertical slide of electrode stand arm

Also known as:

ION meter, benchtop ION meter, bench ION meter, lab ION meter, laboratory ION meter, HORIBA pH meter, Laqua ION meter, pH ION meter, benchtop pH ION meter, HORIBA pH ION meter

The post pH Meter Kit with Chloride Testing – LAQUA CL 2000-S appeared first on Australian Scientific.

• -2.000 to 20.000 pH range
• 0.1, 0.01, & 0.001 pH resolutions
• USA, NIST, NIST2, DIN, and Custom pH buffer groups
• Up to 6 pH calibration points
• Offset, segment and average slopes data after pH calibration
• Adjustable calibration alarm up to 90 days
• -2000.0 to +2000.0 mV range with ORP calibration option
• 0.000 μg/L to 9999 g/L ion range with 3 selectable units
• Up to 5 user-defined ion calibration points
• Segment and average slopes data after ion calibration
• -30.0 to 130.0°C / -22.0 to 266.0°F temperature range with calibration option
• Auto stable, auto hold, and real time measurement modes
• Electrode status, temperature, and reading stability indicators viewable at a glance
• Large memory accepting up to 2000 data sets with date/time stamp
• Auto data log function with adjustable time interval
• Real time clock facilitating time-dependent functions
• Adjustable auto shut-off time up to 30 mins.
• Password protected set-up mode for security
• Software upgrade capability
• PC communication via USB cable and complimentary data acquisition software
• Printer communication via RS232 cable
• 5” Digital, custom LCD display with backlight
• Sleek design with easy-to-use interface and audible key sound feedback
• Small meter footprint with adjustable, integrated electrode stand
• 3 Years warranty

• Height-adjust stopper controls vertical slide of electrode stand arm

Also known as:

ION meter, benchtop ION meter, bench ION meter, lab ION meter, laboratory ION meter, HORIBA pH meter, Laqua ION meter, pH ION meter, benchtop pH ION meter, HORIBA pH ION meter

The post pH Meter Kit with Fluoride Testing – LAQUA F 2000-S LAQUA appeared first on Australian Scientific.

• -2.000 to 20.000 pH range
• 0.1, 0.01, & 0.001 pH resolutions
• USA, NIST, NIST2, DIN, and Custom pH buffer groups
• Up to 6 pH calibration points
• Offset, segment and average slopes data after pH calibration
• Adjustable calibration alarm up to 90 days
• -2000.0 to +2000.0 mV range with ORP calibration option
• 0.000 μg/L to 9999 g/L ion range with 3 selectable units
• Up to 5 user-defined ion calibration points
• Segment and average slopes data after ion calibration
• -30.0 to 130.0°C / -22.0 to 266.0°F temperature range with calibration option
• Auto stable, auto hold, and real time measurement modes
• Electrode status, temperature, and reading stability indicators viewable at a glance
• Large memory accepting up to 2000 data sets with date/time stamp
• Auto data log function with adjustable time interval
• Real time clock facilitating time-dependent functions
• Adjustable auto shut-off time up to 30 mins.
• Password protected set-up mode for security
• Software upgrade capability
• PC communication via USB cable and complimentary data acquisition software
• Printer communication via RS232 cable
• 5” Digital, custom LCD display with backlight
• Sleek design with easy-to-use interface and audible key sound feedback
• Small meter footprint with adjustable, integrated electrode stand
• 3 Years warranty

• Height-adjust stopper controls vertical slide of electrode stand arm

Also known as:

ION meter, benchtop ION meter, bench ION meter, lab ION meter, laboratory ION meter, HORIBA pH meter, Laqua ION meter, pH ION meter, benchtop pH ION meter, HORIBA pH ION meter

The post pH Meter Kit with Nitrate Testing – LAQUA NO3 2000-S appeared first on Australian Scientific.

• -2.000 to 20.000 pH range
• 0.1, 0.01, & 0.001 pH resolutions
• USA, NIST, NIST2, DIN, and Custom pH buffer groups
• Up to 6 pH calibration points
• Offset, segment and average slopes data after pH calibration
• Adjustable calibration alarm up to 90 days
• -2000.0 to +2000.0 mV range with ORP calibration option
• 0.000 μg/L to 9999 g/L ion range with 3 selectable units
• Up to 5 user-defined ion calibration points
• Segment and average slopes data after ion calibration
• -30.0 to 130.0°C / -22.0 to 266.0°F temperature range with calibration option
• Auto stable, auto hold, and real time measurement modes
• Electrode status, temperature, and reading stability indicators viewable at a glance
• Large memory accepting up to 2000 data sets with date/time stamp
• Auto data log function with adjustable time interval
• Real time clock facilitating time-dependent functions
• Adjustable auto shut-off time up to 30 mins.
• Password protected set-up mode for security
• Software upgrade capability
• PC communication via USB cable and complimentary data acquisition software
• Printer communication via RS232 cable
• 5” Digital, custom LCD display with backlight
• Sleek design with easy-to-use interface and audible key sound feedback
• Small meter footprint with adjustable, integrated electrode stand
• 3 Years warranty

• Height-adjust stopper controls vertical slide of electrode stand arm

Also known as:

ION meter, benchtop ION meter, bench ION meter, lab ION meter, laboratory ION meter, HORIBA pH meter, Laqua ION meter, pH ION meter, benchtop pH ION meter, HORIBA pH ION meter

The post pH Meter Kit with Potassium Testing – LAQUA K 2000-S appeared first on Australian Scientific.

• -2.000 to 20.000 pH range
• 0.1, 0.01, & 0.001 pH resolutions
• USA, NIST, NIST2, DIN, and Custom pH buffer groups
• Up to 6 pH calibration points
• Offset, segment and average slopes data after pH calibration
• Adjustable calibration alarm up to 90 days
• -2000.0 to +2000.0 mV range with ORP calibration option
• 0.000 μg/L to 9999 g/L ion range with 3 selectable units
• Up to 5 user-defined ion calibration points
• Segment and average slopes data after ion calibration
• -30.0 to 130.0°C / -22.0 to 266.0°F temperature range with calibration option
• Auto stable, auto hold, and real time measurement modes
• Electrode status, temperature, and reading stability indicators viewable at a glance
• Large memory accepting up to 2000 data sets with date/time stamp
• Auto data log function with adjustable time interval
• Real time clock facilitating time-dependent functions
• Adjustable auto shut-off time up to 30 mins.
• Password protected set-up mode for security
• Software upgrade capability
• PC communication via USB cable and complimentary data acquisition software
• Printer communication via RS232 cable
• 5” Digital, custom LCD display with backlight
• Sleek design with easy-to-use interface and audible key sound feedback
• Small meter footprint with adjustable, integrated electrode stand
• 3 Years warranty

• Height-adjust stopper controls vertical slide of electrode stand arm

Also known as:

ION meter, benchtop ION meter, bench ION meter, lab ION meter, laboratory ION meter, HORIBA pH meter, Laqua ION meter, pH ION meter, benchtop pH ION meter, HORIBA pH ION meter

The post pH Meter Kit with ION Testing – LAQUA ION2000 appeared first on Australian Scientific.

• NOTE: ORP & ION electrodes sold separately
• -2.000 to 20.000 pH range
• 0.1, 0.01, & 0.001 pH resolutions
• USA, NIST, NIST2, DIN, and Custom pH buffer groups
• Up to 6 pH calibration points
• Offset, segment and average slopes data after pH calibration
• Adjustable calibration alarm up to 90 days
• -2000.0 to +2000.0 mV range with ORP calibration option
• 0.000 μg/L to 9999 g/L ion range with 3 selectable units
• Up to 5 user-defined ion calibration points
• Segment and average slopes data after ion calibration
• Up to 2.000 S/cm conductivity range
• Adjustable reference temperature: 15 to 30 °C
• Adjustable temperature coefficient: 0.00 to 10.00 % per °C
• Accepts 0.0700 to 13.000 cell constant
• Allows auto and manual conductivity calibrations
• Up to 5 conductivity calibration points
• Auto ranging S/cm and S/m conductivity units
• 0.01 mg/L to 100 g/L TDS range
• Pre-programmed TDS curves: Linear (0.40 to 1.00 TDS factor), EN27888, 442, & NaCl
• 0.000 Ω•cm to 20.0 MΩ•cm resistivity range
• 0.0 to 100.0 ppt and 0.00 to 10.00 % salinity ranges
• Pre-programmed salinity curves: NaCl and seawater
• -30.0 to 130.0°C / -22.0 to 266.0°F temperature range with calibration option
• Auto stable, auto hold, and real time measurement modes
• Electrode status, temperature, and reading stability indicators viewable at a glance
• Large memory accepting up to 2000 data sets with date/time stamp
• Auto data log function with adjustable time interval
• Real time clock facilitating time-dependent functions
• Adjustable auto shut-off time up to 30 mins.
• Password protected set-up mode for security
• Software upgrade capability
• PC communication via USB cable and complimentary data acquisition software
• Printer communication via RS232 cable
• 5” Digital, custom LCD display with backlight
• Sleek design with easy-to-use interface and audible key sound feedback
• Small meter footprint with adjustable, integrated electrode stand
• 3 Years warranty

The post pH Meter Kit with Conductivity, ORP, ION, TDS, Salinity and Temp – LAQUA PC2000-S appeared first on Australian Scientific.