• 5-in-1 meter for wind speed, light, sound level, temperature and humidity measurement
• Large LCD with green, yellow and red indication
• Supplied with calibration certificate in sturdy protective pouch
• Max min / AVG / data hold functions
• Low battery indication
• Audible alarm
• Auto power off

The post 5-in-1 Environmental Meter appeared first on Australian Scientific.

• Air velocity and air volume measurement with temperature and humidity meter
• Large LCD with green, yellow and red light indication
• Supplied with calibration certificate in sturdy protective pouch
• Air velocity level indication
• Max min / AVG / data hold functions
• Low battery indication
• Audible alarm
• Auto power off

The post Anemometer with Temperature and Humidity appeared first on Australian Scientific.

• the ultra fine tip and the contrasty black colour allow clearly legible writing
• writes immediately (no priming required)
• water-resistant
• resists most laboratory chemicals
• odourless
• non-toxic
• without solvents, aqueous-based
• does not readily dry out and lasts a long time
• with holding clip to attach it to your pocket or writing board

The post Laboratory Marker – Black appeared first on Australian Scientific.

• Light level measurement with temperature and humidity meter
• Large LCD with green, yellow and red light indication
• Supplied with calibration certificate in sturdy protective pouch
• User selectable Lux/Fc
• Max min / AVG / data hold functions
• Low battery indication
• Audible and visual
• Auto power off

The post Light Meter with Temperature and Humidity appeared first on Australian Scientific.

• Sound level measurement with temperature and humidity meter
• Large LCD with green, yellow and red sound level indication
• Supplied with calibration certificate in sturdy protective pouch
• A/C frequency weighting
• Max min / data hold functions
• Selectable response time: FAST/SLOW
• Low battery indication
• Audible alarm
• Auto power off

The post Sound Level Meter with Temperature & Humidity appeared first on Australian Scientific.

Take the guesswork out of water quality testing with the HORIBA TB220 Turbidity Meter Kit. The all-in-one solution is designed for precision, reliability, and convenience. Whether you work in a lab, a treatment plant, or out in the field, the TB220 gives you fast, accurate turbidity measurements you can trust.

It is built to meet ISO 7027 and DIN EN 27027 standards. This turbidity meter delivers results you can rely on for compliance and reporting. With up to four calibration points and a wide measurement range – auto-ranging up to 2000 NTU (including 0.02, 20, 100, and 800 NTU points), you can measure everything from crystal-clear drinking water to highly turbid samples with confidence.

Say goodbye to manual record-keeping. The TB220 stores up to 2000 data points, complete with date and time stamps, making audits and reporting a breeze. Plus, it’s PC and printer compatible and software upgradeable, so you’re always ready for the future.

This convenient kit includes everything you need to get started right away:

• Rugged carrying case for portability

• Instruction and Quick Start manuals for easy setup

• Sample vials and SDVB turbidity standard solutions (10 mL each) for calibration

• Silicone oil and a cleaning cloth to keep your vials in perfect condition

With the HORIBA TB220, you get laboratory-grade accuracy in a portable, easy-to-use package. Perfect for environmental monitoring, industrial water treatment, and routine quality control.

The post Turbidity Meter Kit – Portable HORIBA TB220-K appeared first on Australian Scientific.

Key Applications:

• Cell Lysing
• Emulsifications
• Mixing Microplates

Product Features:

• Dual LED Displays: Independent readouts for speed and time for easy monitoring.
• Programmable Pulse Function: Adjust pulse ON/OFF intervals between 1–59 seconds for customized shaking patterns.
• Flexible Timer Options: Set the timer to count down and stop when time expires, or use continuous mode to accumulate run time until manually stopped.
• Durable Construction: Built with robust die-cast aluminum for stability and longevity.
• RS-232 Communication: Allows for external control and data logging.

Perfect for high-speed, efficient mixing in demanding lab environments.

The post Microplate Shaker – Orbital, 3.6 mm, 48 microplates, Model SHHSMPDG appeared first on Australian Scientific.

The post Test Sieve 200mm Diameter – 106μm Aperture – Brass appeared first on Australian Scientific.

Filter flasks, also known as a Buchner flask, are laboratory glassware designed for vacuum filtration processes. These flasks are made of durable borosilicate glass, allowing them to withstand chemical reactions and high temperatures. A Buchner flask is used to separate solids from liquids. Commonly during procedures like filtration of precipitates in chemistry experiments. They are equipped with a thick-walled, sturdy design to handle the vacuum pressure applied during filtration. They are often connected to a vacuum pump or suction source. Filter flasks feature a sidearm for vacuum attachment and a flat bottom for stability. A filter paper or membrane is placed in a funnel, and the liquid is drawn through by suction, leaving the solid particles behind. These flasks are essential in laboratories for efficient liquid separation, ensuring purity and clarity in various chemical, biological, and environmental testing applications.

VIEW OUR FLASK RANGE HERE

The post Filter Flask 250ml – Neck ID Approx. 28mm appeared first on Australian Scientific.

Filter flasks, also known as Buchner flasks, are laboratory glassware designed for vacuum filtration processes. These flasks are made of durable borosilicate glass, allowing them to withstand chemical reactions and high temperatures. Filter flasks are used to separate solids from liquids, commonly during procedures like filtration of precipitates in chemistry experiments. They are equipped with a thick-walled, sturdy design to handle the vacuum pressure applied during filtration, often connected to a vacuum pump or suction source. Filter flasks feature a sidearm for vacuum attachment and a flat bottom for stability. A filter paper or membrane is placed in a funnel, and the liquid is drawn through by suction, leaving the solid particles behind. These flasks are essential tools in laboratories for efficient liquid separation, ensuring purity and clarity in various chemical, biological, and environmental testing applications.

The post Filter Flask 500ml – Neck ID Approx. 34mm appeared first on Australian Scientific.

Filter flasks, also known as Buchner flasks, are laboratory glassware designed for vacuum filtration processes. These flasks are made of durable borosilicate glass, allowing them to withstand chemical reactions and high temperatures. Filter flasks are used to separate solids from liquids, commonly during procedures like filtration of precipitates in chemistry experiments. They are equipped with a thick-walled, sturdy design to handle the vacuum pressure applied during filtration, often connected to a vacuum pump or suction source. Filter flasks feature a sidearm for vacuum attachment and a flat bottom for stability. A filter paper or membrane is placed in a funnel, and the liquid is drawn through by suction, leaving the solid particles behind. These flasks are essential tools in laboratories for efficient liquid separation, ensuring purity and clarity in various chemical, biological, and environmental testing applications.

The post Filter Flask 1L – Neck ID Approx. 33mm appeared first on Australian Scientific.

Filter flasks, also known as Buchner flasks, are laboratory glassware designed for vacuum filtration processes. These flasks are made of durable borosilicate glass, allowing them to withstand chemical reactions and high temperatures. Filter flasks are used to separate solids from liquids, commonly during procedures like filtration of precipitates in chemistry experiments. They are equipped with a thick-walled, sturdy design to handle the vacuum pressure applied during filtration, often connected to a vacuum pump or suction source. Filter flasks feature a sidearm for vacuum attachment and a flat bottom for stability. A filter paper or membrane is placed in a funnel, and the liquid is drawn through by suction, leaving the solid particles behind. These flasks are essential tools in laboratories for efficient liquid separation, ensuring purity and clarity in various chemical, biological, and environmental testing applications.

The post Filter Flask 2L – Neck ID Approx. 36mm appeared first on Australian Scientific.

Filter flasks, also known as Buchner flasks, are laboratory glassware designed for vacuum filtration processes. These flasks are made of durable borosilicate glass, allowing them to withstand chemical reactions and high temperatures. Filter flasks are used to separate solids from liquids, commonly during procedures like filtration of precipitates in chemistry experiments. They are equipped with a thick-walled, sturdy design to handle the vacuum pressure applied during filtration, often connected to a vacuum pump or suction source. Filter flasks feature a sidearm for vacuum attachment and a flat bottom for stability. A filter paper or membrane is placed in a funnel, and the liquid is drawn through by suction, leaving the solid particles behind. These flasks are essential tools in laboratories for efficient liquid separation, ensuring purity and clarity in various chemical, biological, and environmental testing applications.

The post Filter Flask 3L – Neck ID Approx. 35mm appeared first on Australian Scientific.

• Made from durable borosilicate glass 3.3 (Simax)
• Excellent chemical resistance
• Low thermal expansion
• High resistance to thermal shock
• Autoclavable for easy sterilization
• Erlenmeyer shape for stability and ease of use
• Features a loosely attached plastic hose nozzle for convenience

The post Filter Flask 1L with Polypropylene Connector – Neck ID Approx. 45mm appeared first on Australian Scientific.

The post Hot Hand Holder – Silicone Grey appeared first on Australian Scientific.

*Please note that a bosshead clamp is required to attach this 4-prong clamp to a retort stand. Click the link below to view this product:
Bosshead Clamp – for 16mm diameter rods

The post Clamp 4-prong 80mm appeared first on Australian Scientific.

This 25mL glass beaker is made from high-quality borosilicate glass 3.3, offering excellent chemical resistance and minimal thermal expansion. Built to withstand demanding lab environments, it resists thermal shock and is ideal for heating and mixing applications. The beaker features a convenient spout for easy pouring, white graduation markings for accurate volume measurement, and complies with DIN 12331 and ISO 3819 standards.

Key Features:

• Made from durable borosilicate glass 3.3

• Capacity: 25 mL

• Conforms to DIN 12331 and ISO 3819

• Excellent chemical and thermal resistance

• Low thermal expansion for high heat tolerance

• Easy-pour spout

• White graduation markings for visibility and precision

VIEW MORE BEAKER SIZES HERE

The post Beaker 25ml Low Form – 30030 appeared first on Australian Scientific.

This 50mL glass beaker is made from high-quality borosilicate glass 3.3, offering excellent chemical resistance and minimal thermal expansion. Built to withstand demanding lab environments, it resists thermal shock and is ideal for heating and mixing applications. The beaker features a convenient spout for easy pouring, white graduation markings for accurate volume measurement, and complies with DIN 12331 and ISO 3819 standards.

Key Features:

• Made from durable borosilicate glass 3.3

• Capacity: 50 mL

• Conforms to DIN 12331 and ISO 3819

• Excellent chemical and thermal resistance

• Low thermal expansion for high heat tolerance

• Easy-pour spout

• White graduation markings for visibility and precision

VIEW MORE BEAKER SIZES HERE

The post Beaker 50ml Low Form – 30045 appeared first on Australian Scientific.